Sr.No.

Nature of Training

Duration

Organization where training was provided

1

Workshop - [Advanced Engineering Optimization Through Intelligent Techniques.]

16/06/2008

To

20/06/2008

NIT, Surat (G.J.)

2

Seminar - [ Energy Conservation & Audit]

16/02/2009

To

16/02/2009

SSBTS College Of Engineering & Technology. BAMBHORI, JALGAON

3

Workshop - [Solar & Wind Energy: Theory & Practice.]

27/02/2009 To 12/03/2009

NIT,  Bhopal (M.P.)

4

Workshop - [Effective Teaching]

23/06/2009 To 27/06/2009

SSVPS Bapusaheb Shivajirao Deore College of Engineering, Dhule.

5

Workshop - [Solar photovoltics, Fundamentals, Technologies And Applications]

12/12/2011 To 22/12/2011

IIT, Bombay

6

Workshop  - [Innovation in Maintenance Management]

21/05/2012 To 25/05/2012

IIT, Delhi

7

Energy Audit workshop on oil conservation organized by PCRA Ministry of Petroleum & Natural Gas Government of India

11/03/2013

SSVPS Bapusaheb Shivajirao Deore College of Engineering, Dhule.

8

Workshop - [TEQIP Workshop on Research at Mechanical Engineering Department]

22/12/2014 to 23/12/2014

IIT, Bombay

9

Workshop - [Recent Trends in Non-Conventional Energy with the focus on Solar and Wind Energy]

25/05/2015 To 29/05/2015

Government College of Engg. Karad

10

Workshop - [Continuing Education Program - Computational Fluid Dynamics: Theory and Practice]

15/06/2015 To 19/06/2015

NIT,  Surat (GJ)

11

Workshop – [TEQIP-II Sponsored – Impending Paradigm shift in Engineering and India’s Preparedness]

23/09/2015

To

23/09/2015

Shri Guru GobindSinghji Institute of Engineering & Technology, Nanded.

12

STTP – Statistical Analysis for Signal and Image Processing and Data Analysis

27/02/2017To 04/03/2017

Shri Guru GobindSinghji Institute of Engineering & Technology, Nanded.

13

3rd TEQIP Innovation Networking Project Meeting & Exhibition

23/03/2017 To 23/03/2017

Institute of Chemical Technology, Mumbai.

14

Short Term Course – Machining Dynamics

15/10/2018 To 19/10/2018

IIT, Kanpur

15

AICTE Sponsored QIP – Machine Learning and Applications 

21/01/2019 To 25/01/2019

SGGSIE & T, Nanded

16

Two Week FDP- Pedagogical and Assessment Techniques for Product Design Engineering

25/02/2019 To 06/03/2019

Dr. BabasahebAmbedkar Technological University, Lonere, Raigad, Maharashtra

17

AICTE Sponsored FDP- Faculty Development Program for Student Induction

27/05/2019 To 29/05/2019

CSMSS, COE, Aurangabad

18

AICTE Sponsored FDP- Faculty Development Program for Student Induction on UHV

09/12/2019 To 15/12/2019

SandeepInstitue of Engineering and Mangement, Nashik

19

Outcome Based Education: A Step Towards Excellence

11/05/2020

To 15/05/2020

Government College of Engineering, Karad

20

Advanced Trends in Engineering

19/05/2020 To 23/05/2020

NIT, Nagpur In Association with Institution of Engineers

21

Open FOAM

01/06/2020 To 07/06/2020

SVKM Institute of Technology, Dhule, In Association with IIT, Bombay

22

Robotics, Automation and Industry 4.0

08/06/2020 To 12/06/2020

Dr. D. Y. Patil Institute of Technology, Pimpri, Pune.

In Association with Indian Machine Tool Manufactures Association

23

Product Development & Industrial Research-2020

06/07/2020 To 10/07/2020

Government College of Engineering, Aurangabad

Train the Teacher Training Program (TTT) online learning: Classroom TeachingPlatform.

24/07/2020 To 27/07/2020

KBCNMU, Jalgaon

24

Current Biomedical Applications of 3D Printing and Additive Manufacturing

02/11/2020 To 07/11/2020

G H Raisoni College of Engineering, Nagpur

25

Advancement in Renewable Energy

14/12/2020 To

19/12/2020

Government College of Engineering, Nagpur

26

Application of Artificial Intelligence and Machine Learning in Mechanical Engineering

22/03/2021 To 26/03/2021

Dr. D. Y. Patil Institute of Technology Pimpri, Pune-18

27

Techniques forPromotingCreativity andInnovationAmongStudents

24/05/2021 To 28/05/2021

 Dr. RajendraGode Institute of Technology and Research, Amravati

28

Experimental Methods in Engineering

05/07/2021 To 09/07/2021

TEQIP Sponsored Government College of Engineering Karad

29

Research Avenues in Thermal Engineering (RATE-2021)

26/07/2021 To 30/07/2021

Vasavi College of Engineering, Hydrabad (AP)

30

Environmental Cyber Physical Systems

23/08/2021 To 27/08/2021

Indo-South Korea Joint Network Center, IIT Indore

31

Innovation Management

06/09/2021 To 10/09/2021

AICTE Training and Learning DBATU, Lonere, Raigad

32

Novel Materials

04/10/2021 To 08/10/2021

AICTE Training and Learning, NIT, Mizoram.

33

Emerging Trends in Mechanical Engineering

20/06/2022 To 25/06/2022

Seshadri RaoGudlavalleru Engineering College, Gudlavalleru, Krishna, AP

34

CNC Turning and Milling

28/11/2022 To 03/12/2022

Ministry of Micro. Small & Medium Enterprises Technology Centre, Indore, MP

35

Exploring the Frontier: Additive  Manufacturing & 3D Printing in Industry 4.0

09/12/2024 To 14/12/2024

AICTE Training and Learning, SVKM’S NIMS

36

Research to Reality: Exploring Methodology and IPR

13/01/2025 To 17/01/2025

Dr. D. Y. Patil Institute of Technology, Pimpri, Pune

37

Global Scenario of Sustainable Energy and Climate Change

27/01/2025 To 01/02/2025

AICTE Training and Learning, PCCOE, Pune

38

Engineering Excellence Integrating Thermal, Design and Material Innovations

10/03/2025 To 14/03/2025

Dr. D. Y. Patil Institute of Technology, Pimpri, Pune

39

Energy Efficient Building & Sustainable Ventilation

19/03/2025 To 20/03/2025

SSVPS Bapusaheb Shivajirao Deore College of Engineering, Dhule.

Sr. No.

Conferences / Seminars attended

Title of paper

Place

1

International Conference on Science, Engineering & Spirituality

Genetic Algorithm based approach in placement of wind turbine within wind farm

S.E.S. College of Engineering, Navalnagar

2

International Conference on Sunrise Technologies

Optimum Design of Axle of Horizontal Axis wind Turbine- A Case Study

SSVPS’s Bapusaheb Shivajirao Deore COE, Dhule

3

International Conference on Advanced and Agile Manufacturing Systems

“Experimental Study of Corrugated Flat Plate Collector (CFPC) for Waste Water Evaporation”

KNIT, Sultanpr UP

4

International Conference on Advanced and Agile Manufacturing and Agile Software Development (ICAM-ASD2016)

“Solar compound parabolic collector: A review”

SGGSIE & T, Nanded.

5

International Conference on Advanced and Agile Manufacturing and Agile Software Development (ICAM-ASD2016)

“Analysis of solar parabolic dish collector by using CFD approach”

SGGSIE & T, Nanded.

6

International Conference on Advanced and Agile Manufacturing and Agile Software Development (ICAM-ASD2016)

“Thermal performance analysis of solar based flat plate collector used for effluent treatment”

SGGSIE & T, Nanded.

7

International Conference on Advanced and Agile Manufacturing and Agile Software Development (ICAM-ASD2016)

“Experimental study on the performance of flat plate collector for effluent treatment”

SGGSIE & T, Nanded.

8

National conference on Renewable Energy Sources for Sustainable Climate

“Comparative study of spiral tube flat plate collector for industrial effluent evaporation- Unglazed conditions”

IIT, Varanasi

9

National conference on Renewable Energy Sources for Sustainable Climate

“Design and fabrication of concentrated parabolic collector for steam based application”

IIT, Varanasi

10

International Conference on Green Energy 2023.

Under the Aegis of Western Regional Chapter of Solar Energy Society of India (SESI).

Thermal Performance analysis of serpentine tube flat plate collector used for Effluent Treatment

AISSM, COE, Pune

11

4th International Conference on Advances in Engineering, Technology & Business Management (ICAETBM-2024) 24-25 May 2024

Pebble Bed Thermal Storage for Building Cooling with Evaporative Cooling System

Nutan Maharashtra Institute of Engineering & Technology, Pune

Sr. No.

Title of Paper

Name of Journal

ISSN No

Status

1

Experimental Study of use of Solar Energy for the Effluent Treatment by Using Flat Plate Collector

International Journal of Emerging Trends in Science and Technology

ISSN- 2348-9480

Published

2015

2

Experimental Analysis of Corrugated flat plate collector for Effluent Evaporation

International Journal of Engineering Science & Research Technology.

Issue-7 From 629 to 637

ISSN- 2277-9655

Published

2016

3

Theoretical and Experimental study of open serpentine tube flat plate collector for effluent evaporation by using solar energy.
 

Institution of Engineers

Annual Technical Volume- 2017

ISBN-978-81-936149-0-7

Published 2017

4

Theoretical and Experimental analysis of glazed serpentine tube flat plate collector for effluent evaporation

Inderscience- International Journal of Renewable Energy Technology

From 68 To 82

ISSN 1757-3971

Published

2019

5

Thermal analysis of Copper tube receiver of solar parabolic dish collector using computational fluid dynamics

International Journal of Advances in Engineering and Management

Vol.4 Issue-7 PP. 519-524

ISSN: 2395-5252

Published 2022

6

A Review on Recent Advancements in Indirect Solar Drying of Agricultural Products

Journal of Renewable Energy and Environment

Publisher- Materials and Energy Research Center (MERC)

ISSN-2423-5547  Online-2423-7469

Published 2022

7

Thermal Performance analysis of serpentine tube flat plate plate collector used for Effluent Treatment

Indian Journal of  Technical  Education

Publisher Indian Society for Technical Education (ISTE)

ISSN-0971-3034

Published 2023

8

Pebble Bed Thermal Storage for Building Cooling with Evaporative Cooling System

Indian Journal of  Technical  Education

Publisher Indian Society for Technical Education (ISTE)

ISSN-0971-3034

Published 2024

9

Theoretical and Experimental analysis of unglazed serpentine tube flat plate collector for effluent evaporation

Springer- Non-conventional and Renewable Energy, Fluid Mechanics & Machinery

Under review- First Review Submitted

10

Parametric study of single cover spiral tube flat plate collector for effluent treatment

Elsevier- Solar energy

Under review- First revision Submitted

Sr. No.

Title of Workshop

Level

Place

Period

1

National Training Workshop on Entrepreneurship in Renewable Energy, with special emphasis on manufacturing “Parabolic Solar Cookers”

National

SSVPS Bapusaheb Shivajirao Deore College of Engineering Deopur Dhule.

27/01/2010 To 29/01/2010

2

Training Programme for "Installation Commissioning testing and operation & Maintenance of Scheffler solar cookers and steam cooking Systems”

International

SSVPS Bapusaheb Shivajirao Deore College of Engineering Deopur Dhule.

21/01/2012 To 27/01/2012

3

One week Workshop on R & D In Solar and Wind Energy Systems

National

Shri Guru GobindSinghji Institute of Engineering & Technology, Nanded

08/01/2017 To 13/01/2017

4

ISTE Sponsored one week Short Term Training Programme on Research and Innovations in Solar Energy

National

SSVPS Bapusaheb Shivajirao Deore College of Engineering Deopur Dhule.

12/02/2024 To 16/02/2024

Sr. No

Funding Agency

Project Title

Project Period

Amount in

Rs.

Present Status

1

TEQIP-II (INN) Institute of Chemical Technology, Mumbai

Design and Fabrication of Improved Mobile Blancher for Turmeric Processing.

2 Year

12,50,000

01/10/2014

To

01/10/2016

Completed

2

R & D Fund Shri Guru GobindSinghji Institute of Engineering & Technology, Nanded.

Design and Development of serpentine tube flat plate collector for Effluent Treatment in process Industry

1 Year

1,00,000

02/01/2015 To 01/02/2016

Completed

3

TEQIP-II (INN) Institute of Chemical Technology, Mumbai

Solar energy Based Water Recovery & Effluent Evaporation System

1 Year

05,50,000

04/03/2016

To 03/03/2017

Completed

Sr. No.

Type of Program

Title of Program

Place

Date

1

Suryamitra One Month Training Installation and testing of Solar PV panels

Practical Training use of Pyranometer and data collection, RTD connections and Data logger

Government Polytechnic, Nanded

22/02/2017

To

24/02/2017

2

ISTE approved Short Term Training Program

“Advanced Technology for Energy Conservation and Sustainable Development”

Government Polytechnic, Nanded

28/02/2017